nanoDLP

qingquan

Member

Registered: 2017-10-19

Posts: 24

print and file preview preview window is very small

Referred to in GITHUB"A 2,4" nextion screen (or an higher size, but you'll have to update the HMI file,...)"，I used to be 5 "(800*480) Nextion, is written in a 800*480 firmware, print and file preview window is very small, or 2.4" setting in the Nextion position, how should I change into 5 "Nextion can show the normal position and size?
The screen photos in the link below
https://photos.app.goo.gl/N3KuEhTPhBBng2ft1

Last edited by qingquan (2017-10-31 08:52:33)

qingquan

Member

Registered: 2017-10-19

Posts: 24

Re: print and file preview preview window is very small

I've got the answer

suraalex

Member

Registered: 2018-05-03

Posts: 2

Re: print and file preview preview window is very small

Hi qingquan!

I have the same problem with 5 "Nextion and I´m looking for an opportunity to adjustment this window on normal position and size. What is the answer, what you´ve got?

Thank you in Advance!