nanoDLP

Dylan144GT

Member

Registered: 2017-09-25

Posts: 8

Error with G-Code Stopping Print

Hi All,

Been dry running my machine for the last few days and it stops in the middle of a print at least once quite consistently. From what I can see in the Error log it seems to be related to the "wait for done message" that is provided by the patched GRBL 0.9f code. One can see the giberish the serial port puts out at the end of print.log file.

Can anyone shed some light please? Linked is my error log zip.

Thanks,

Dylan

Last edited by Dylan144GT (2017-09-28 11:01:37)

Shahin

Administrator

Registered: 2016-02-17

Posts: 3,541

Re: Error with G-Code Stopping Print

Looks like connectivity issue. Replace cable between rpi and arduino.

Dylan144GT

Member

Registered: 2017-09-25

Posts: 8

Re: Error with G-Code Stopping Print

Hi Shahin,

Thanks for the response. I thought that might have been the case, I have seen this before on other systems. I will try with a new cable and post back on how it pans out. Eventually I will move to bluetooth, I am just waiting for the dongle to arrive.

Dylan