You are not logged in.
- Topics: Active | Unanswered
#1 2016-04-20 19:01:14
- Shahin
- Administrator
- Registered: 2016-02-17
- Posts: 3,541
Successful Prints
We are printing lots of models each day with following setup (we cast them)
I am quite interested to see what people could achieve using their printers.
Software: nanodlp (direct control)
Machine: Custom
Resolution: z: 25micron xy: 60 and 80micron
Projector: Acer BD6510H
VAT Floor: Sylgard
Offline
#2 2016-07-25 18:07:52
- RMZ
- Member
- Registered: 2016-06-24
- Posts: 4
Re: Successful Prints
Hey dear,which kind of resins are you using now?
like,for this product.
what are it,s characteristics?
Offline
#3 2016-07-27 07:37:01
- Xmike
- Member
- Registered: 2016-03-25
- Posts: 97
Re: Successful Prints
A view of this page might answer your question.
http://www.3dm-shop.com/#!blank/rwrlr/8 … e79c42b37c
Last edited by Xmike (2016-07-27 07:38:47)
Offline
#4 2016-07-27 10:54:37
- Shahin
- Administrator
- Registered: 2016-02-17
- Posts: 3,541
Re: Successful Prints
We are using lots of different resins, to be honest casting differences among them is very subtle as long as you are using good oven. It is just matter of pricing and other general material attributes.
Offline
#5 2016-07-28 18:01:48
- RMZ
- Member
- Registered: 2016-06-24
- Posts: 4
Re: Successful Prints
Thanks all. I don't want to cast them. Actually I need that it has acceptable surface and details .
Offline
#17 2016-08-05 12:05:30
- Shahin
- Administrator
- Registered: 2016-02-17
- Posts: 3,541
Re: Successful Prints
Very very nice surfaces.
I think you had mistakenly posted Eminem music video!
Offline
#20 2016-08-06 06:55:35
- mandreas
- Member
- Registered: 2016-03-13
- Posts: 136
Re: Successful Prints
congratulations for the high surface quality, may I ask, which projector you use?
Offline
#21 2016-08-06 13:56:19
Re: Successful Prints
thanks !
I use Vivitek ,
http://www.nanodlp.com/forum/viewtopic.php?id=136&p=2
Offline
#24 2016-08-22 16:45:03
Re: Successful Prints
sgraber wrote:Who's resin are you using?
next time be more polite if you ask some think , I'm not your father to keep your a...
I use custom mixed resin , it's calibration for DLprinter.com
it can't help you
I'm sorry? I just thought I'd ask! 
Offline
#25 2016-08-22 17:19:23
- backXslash
- Member
- Registered: 2016-03-25
- Posts: 151
Re: Successful Prints
Here are some of mine, for funsies
Offline