nanoDLP

Yianni-VJ

Member

Registered: 2016-05-24

Posts: 95

Crashing while Slicing

While slicing this file on the Pi, system halts and I lose connectivity.
I tried to do the same in windows version, nanoDLP crashes as well.

Can anybody suggest what could be the issue?
Here is the file:
https://drive.google.com/a/virtual-jewe … sp=sharing

Last edited by Yianni-VJ (2017-08-15 15:13:46)

Yianni-VJ

Member

Registered: 2016-05-24

Posts: 95

Re: Crashing while Slicing

For whoever like to reproduce this error, I forgot to mention I sliced at 25 microns.

Shahin

Administrator

Registered: 2016-02-17

Posts: 3,541

Re: Crashing while Slicing

It requires permission to download the file.

Do you see any message after crash? On rpi or win.

Yianni-VJ

Member

Registered: 2016-05-24

Posts: 95

Re: Crashing while Slicing

Here is a dropbox link:
https://www.dropbox.com/s/35hvt1w2zg4az … 5.stl?dl=0

There are no msgs before crashing, it seems like slicing is completed and nanodlp.exe shuts down abruptly.

Shahin

Administrator

Registered: 2016-02-17

Posts: 3,541

Re: Crashing while Slicing

I could not crash nanodlp on 25microns. Could you share debug file, I will use same profile as yours to see if I could crash it or not.

Yianni-VJ

Member

Registered: 2016-05-24

Posts: 95

Re: Crashing while Slicing

This file has my logs after a crash and a different STL file which I have just tested to crash.
After rebooting the Pi I had to delete the erroneous plate to avoid the loop.
https://www.dropbox.com/s/yfkoaktavragu … g.zip?dl=0