You are not logged in.

#1 2017-08-04 11:09:17

picoworm
Member
Registered: 2017-08-04
Posts: 2

Burn in layers reverse dimming

Hi guys

All prints have overcured burn in layers due to their long curing time.

How about next technique to make burn-in layers dimension same as normal layers?

Step 1. Make dimmed picture with dimmed wall (0% transparent wall, 100% transparent body)
Step 2. Cure with burn in time
Step 3. Do not move z axis
Step 4. Make dimmed picture with dimmed wall (100% transparent wall, 0% transparent body)
Step 5. Cure with normal layer cure time

Step 6. Move to next layer

Offline

#2 2017-08-04 12:04:38

juliendelnatte
Member
Registered: 2017-06-07
Posts: 84

Re: Burn in layers reverse dimming

Or just make wall XX% transparent. so you can calculate it : (normal cure time = 10seconds, burn in = 50seconds so, dim the wall to 20% (50seconds * 20% = 10seconds normal layer)

no?

Offline

#3 2017-08-04 13:17:04

picoworm
Member
Registered: 2017-08-04
Posts: 2

Re: Burn in layers reverse dimming

I want to be able to play this values and choose the right one.
How it can be done on nanodlp?

Last edited by picoworm (2017-08-04 18:22:51)

Offline

Board footer

Powered by FluxBB