Build 1552 Issue on plate import

1125lbs · 2017-06-29 11:16:22

Hi,

when im upload a stl or SLC file(new plates after update only), no information is displayed on "[ Toggle Details ] "???

Shahin · 2017-06-29 20:25:20

Press CTRL+F5 to make sure resources are not cached if the issue continues let me know.

1125lbs · 2017-06-29 21:20:20

i have tried(stl binary,slc) upload again, with no success.

it seems that formula is being calculated, but theres no info from layers section

Shahin · 2017-06-29 21:30:37

I guess you have pressed Toggle Details button right?

1125lbs · 2017-06-29 21:31:34

yes

Last edited by 1125lbs (2017-06-29 21:34:57)

Shahin · 2017-06-30 05:45:57

Even rendered layer looks strange. Are you using direct control?

1125lbs · 2017-06-30 05:55:33

yes

all parts ( even with AA turned off) (bright-255) are reurning in half shade slices... its being an issue for me, and sensitive enough to 25µ pixel size, making dynamic cure not that eficiently

Last edited by 1125lbs (2017-06-30 05:58:02)

Shahin · 2017-06-30 06:12:33

It could be a mask issue. Remove it see if rendering become normal

1125lbs · 2017-06-30 06:15:44

Shahin wrote:

It could be a mask issue. Remove it see if rendering become normal

mask is turned-off

Last edited by 1125lbs (2017-06-30 06:16:51)

Shahin · 2017-06-30 06:24:24

Share the STL file and debug file. I need to dig into it, never seen anything like this before.

1125lbs · 2017-06-30 09:42:08

The "halfshade" was mask issue, strange why its was activated, maybe accidently...i solved spherical distortions physically lens set, it was not required feature before, but some way i resolve to check anyway... thankyou

But the main issue still happening, the missing layering information inisde (Toggle Details) which we use to plan the strategy on formula box.
I export tha same stl both in ascii and bin versions, the same result.other files was test with slc too same results....

Shahin · 2017-06-30 16:05:16

Do you still experience the same issue after slicing gets completed?

1125lbs · 2017-07-01 02:02:22

Shahin wrote:

Do you still experience the same issue after slicing gets completed?

the layer half shade was a mask issue as you mentioned, i tested the ascii & bin, but still lacking the mesh area information

Shahin · 2017-07-01 05:55:38

Try the beta version.

1125lbs · 2017-07-01 13:33:50

Shahin wrote:

Try the beta version.

thank you!

nanoDLP

#1 2017-06-29 11:16:22

Build 1552 Issue on plate import

#2 2017-06-29 20:25:20

Re: Build 1552 Issue on plate import

#3 2017-06-29 21:20:20

Re: Build 1552 Issue on plate import

#4 2017-06-29 21:30:37

Re: Build 1552 Issue on plate import

#5 2017-06-29 21:31:34

Re: Build 1552 Issue on plate import

#6 2017-06-30 05:45:57

Re: Build 1552 Issue on plate import

#7 2017-06-30 05:55:33

Re: Build 1552 Issue on plate import

#8 2017-06-30 06:12:33

Re: Build 1552 Issue on plate import

#9 2017-06-30 06:15:44

Re: Build 1552 Issue on plate import

#10 2017-06-30 06:24:24

Re: Build 1552 Issue on plate import

#11 2017-06-30 09:42:08

Re: Build 1552 Issue on plate import

#12 2017-06-30 16:05:16

Re: Build 1552 Issue on plate import

#13 2017-07-01 02:02:22

Re: Build 1552 Issue on plate import

#14 2017-07-01 05:55:38

Re: Build 1552 Issue on plate import

#15 2017-07-01 13:33:50

Re: Build 1552 Issue on plate import

Board footer