You are not logged in.
Hi,
I tried different settings, but somehow this model never slices correctly with nanoDLP while it does well with other tools (creation Workshop for example).
https://www.dropbox.com/s/gcwvcvszf68ki … w.stl?dl=0
In nanoDLP some layers are missing parts of the print, like the one within the yellow area marked on this picture.
https://www.dropbox.com/s/ve11m1yb08pg1 … r.kpeg.JPG
I wonder what's going on, could this be a bug ?
Offline
Btw i'm using build 1392
Last edited by br1 (2017-05-26 08:54:59)
Offline
Here is a link to the related facebook discussion.
https://www.facebook.com/groups/2879100 … 7278210274
Again, other slicers don't have the issues we have with nanoDLP
Offline
I will take a look at the STL file. but usually imperfect models get handled differently by different slicer.
If the malfunctioned part could be safely sliced I will add workaround to the slicer.
Offline
What is your printer's Z resolution? Which layer do you have issue with?
Offline
Hi Shahin,
I tried with multiple resolutions.
If I do 100 micron slices, layers 22 to 32 and 38 to 41 for example will be wrong.
If I do 30 micron slices, layers 70 to 109 and 124 to 135 will have similara errors.
Offline
Bugfixed
Offline
Thanks for the fix ! Works great now !
Offline
I find the useful information here. Thanks a lot.
Last edited by Jasmin7 (2017-10-12 12:56:01)
Offline
