nanoDLP

mandreas

Member

Registered: 2016-03-13

Posts: 136

Setting nanodlp on KLD-2150

Hi Shahin,

I try to convert my KLD-2150 from photonic 3d to nanodl (the first love does not forget , everything seems to work and respond to commands (z axis, lcd panel)
The problem occurs when I launch a print: the z axis goes to G28, then it is all, no slice projection, everything ends here,
I attach debug files,  could you check where I am wrong,

thank you very much

https://www.dropbox.com/s/e80ruof0cettw … 6.zip?dl=0

Shahin

Administrator

Registered: 2016-02-17

Posts: 3,541

Re: Setting nanodlp on KLD-2150

Something is wrong in gcodes. I suggest to take a look at D7 configurations.
http://3dprinterwiki.info/wiki/wanhao-d … ettings-2/

It is almost identical to KLD-2150

mandreas

Member

Registered: 2016-03-13

Posts: 136

Re: Setting nanodlp on KLD-2150

Something is wrong in gcodes. I suggest to take a look at D7 configurations.
http://3dprinterwiki.info/wiki/wanhao-d … ettings-2/

It is almost identical to KLD-2150

In fact, I had installed nanodlp image for Wanhao d7, which uses FW Repetier (could be?.), now i  changed FW Marlin for Muve, all  function great , except the command M106, M107, the LED does not turn on, i think Is due to some configuration, related to Fansoft maybe??!!

Last edited by mandreas (2017-04-26 17:07:07)

mandreas

Member

Registered: 2016-03-13

Posts: 136

Re: Setting nanodlp on KLD-2150

I solved the problem by using the FW of Sprinter master,
I think there is in Muve, some settings for the Fan (D9) that prevented M106