nanoDLP

Gatto

Member

Registered: 2017-02-14

Posts: 75

Win - SLC rescaling, why?

Created a SLC file, created a plate, it is underscaled.

Checked display resolution, microns, reopened SLC to double check dimensions, everything is ok.

Opened sliced raster, underscaled.

Bug ?

Gatto

Member

Registered: 2017-02-14

Posts: 75

Re: Win - SLC rescaling, why?

Update, also slicing from stl same problem. Checked "override x/y" into profile it's 100%

Shahin

Administrator

Registered: 2016-02-17

Posts: 3,541

Re: Win - SLC rescaling, why?

Are you sure your projector calibrated correctly?
Currently we have XY resolution on setup page another one on profile level which overrides setup level one and also percentage based modifier.

Gatto

Member

Registered: 2017-02-14

Posts: 75

Re: Win - SLC rescaling, why?

Are you sure your projector calibrated correctly?
Currently we have XY resolution on setup page another one on profile level which overrides setup level one and also percentage based modifier.

Double checked, I'm quite sure.

Dynamic calibration works fine and white also.

Update: Dynamic raster file is ok, 2560x1440 and pattern fill the whole area, sliced objects are zoomed out into layer rasters but raster size is ok 2560x1440

Last edited by Gatto (2017-02-19 10:36:39)

Gatto

Member

Registered: 2017-02-14

Posts: 75

Re: Win - SLC rescaling, why?

Found a workaround, override 30% raster is quite ok

Gatto

Member

Registered: 2017-02-14

Posts: 75

Re: Win - SLC rescaling, why?

Ahhhhhhhhhh

into profile, the override is not percentage but micron....