You are not logged in.

#1 2021-07-13 16:08:56

fran42
Member
Registered: 2020-11-16
Posts: 69

3D printed parts sometimes remain in the VAT

Sometimes when I print the piece remains in the bottom of the VAT...

Do you suggest any setting I could change to ensure the part sticks to the plate instead of remaining in the VAT?

Thanks

Offline

#2 2021-07-22 09:48:35

Shahin
Administrator
Registered: 2016-02-17
Posts: 3,518

Re: 3D printed parts sometimes remain in the VAT

What kind of platform surface you are using?

Offline

#3 2021-07-28 13:31:01

fran42
Member
Registered: 2020-11-16
Posts: 69

Re: 3D printed parts sometimes remain in the VAT

I use this in the VAT.
https://www.impresoras3d.com/producto/a … MMQAvD_BwE

Also I found a problem than the pieces are taller than expected.
For example a structure of 600 microns is almost 1mm.
And a structure of 400 microns is 750 microns.

How is it possible? It should not be any possible space to make the piece bigger... have you ever seen a miscommunication between nanodlp and the Z motors? I don't understand what is happening.

Offline

Board footer

Powered by FluxBB