You are not logged in.

#1 2021-07-02 12:36:54

peaceblackhair
Member
Registered: 2018-12-11
Posts: 42

Varied Layer Count between /slicer and plate.json

Hello Shanin,

I'm using build # 4440 and  I just figure out there is some kind of bug in /slicer page. When i'm slicing a file, at the beginning of process it's displays layer count as : 46, whenever slicing operation completed layer count shows 36 but when i check in nanodlp or plate.json file which is located under public/plates/[model_count] i can see layer count as 46. Here is the /slicer output at the beginning of process and end. By the way there is 46 image file in the model folder.

At the Beginning :

{"layerCount":"46","layerID":"0","percentage":"0","plateID":"1","running":"1","url":""}

At the end :

{"layerCount":"36","layerID":"36","percentage":"100","plateID":"0","running":"0","url":""}

I don't know is this related to my model or not. Here is my model file too :

https://drive.google.com/file/d/1ilMGUs … sp=sharing

Offline

#2 2021-07-03 05:15:59

Shahin
Administrator
Registered: 2016-02-17
Posts: 3,518

Re: Varied Layer Count between /slicer and plate.json

Does it display layers between 36~46 on preview section?

Offline

#3 2021-07-05 06:05:52

peaceblackhair
Member
Registered: 2018-12-11
Posts: 42

Re: Varied Layer Count between /slicer and plate.json

Sorry for late reply. Yes it's showing 36-46 layers on preview section.

Last edited by peaceblackhair (2021-07-05 06:06:08)

Offline

#4 2021-07-12 05:01:33

Shahin
Administrator
Registered: 2016-02-17
Posts: 3,518

Re: Varied Layer Count between /slicer and plate.json

Check out latest build.

Offline

#5 2021-07-12 05:54:39

peaceblackhair
Member
Registered: 2018-12-11
Posts: 42

Re: Varied Layer Count between /slicer and plate.json

i tried with Build 4513 which is latest beta and i tried with Build 4440 which is latest stable build but im problem is still occurring.

Offline

#6 2021-08-13 07:10:32

Shahin
Administrator
Registered: 2016-02-17
Posts: 3,518

Re: Varied Layer Count between /slicer and plate.json

Please, try the latest beta again.

Offline

#7 2021-08-19 07:19:09

peaceblackhair
Member
Registered: 2018-12-11
Posts: 42

Re: Varied Layer Count between /slicer and plate.json

it's seems fixed thanks.

Offline

Board footer

Powered by FluxBB