You are not logged in.

#1 2017-02-15 13:33:52

sauvee
Member
Registered: 2017-02-15
Posts: 2

Fuse max Amp for 1206L?

Hi

I am building a RP3 board for direct control using PCB schematic provide in the download section (https://www.nanodlp.com/download/schematic.png)

I planning to use a 12v power supply for the stepper.  What is the max current value of the fuse 1206L?

Thanks

Last edited by sauvee (2017-02-15 13:34:29)

Offline

#2 2017-02-15 17:13:55

bigfilsing
Member
Registered: 2016-11-20
Posts: 306

Re: Fuse max Amp for 1206L?

As the 1206 is only supplying the Raspi ( at 5VDC) for logic 2.5 amps should be more than enough. Maybe increase to 3 if you're running a cooling fan or similar
Its also probably a good idea to join the ground line of the 12 volts supply to the ground line of the 5VDC / RP3 as well

Offline

#3 2017-02-15 17:40:32

sauvee
Member
Registered: 2017-02-15
Posts: 2

Re: Fuse max Amp for 1206L?

Thanks for your answer :-)

Offline

Board footer

Powered by FluxBB