You are not logged in.
Pages: 1
So I have uploaded a test model which I now want to print to test the scaling (though previewing on the LCD the measurements seem spot-on), and MOST importantly, the resin profile.
So my test is at 50µm and exposure in 6.6sec based on the old printer experience. I have added some additional exposure times as per the model Edit Plate -> Advanced Options, namely the "Multiple Print" which I have added: 6,6.4,7,7.4,7.8.
So the question is:
How do I know which model is which exposure?
See attached photos here
Advise welcomed
Jonners59
:-D
Offline
On plate preview click on info button
Offline
On plate preview click on info button
Excellent. Thank you.
When viewing the print preview, it is viewed with the build plate turned over and the front to the left.
PS: There is no "Back" button to return to the plate after viewing. Would be helpful rather than doing so in the browser.
Last edited by Jonners59 (2021-02-06 11:44:46)
Jonners59
:-D
Offline
Pages: 1