You are not logged in.
On the dropdown menu for display communication type, I can't select the hdmi power on/off because it doesn't show up. On the info tab it shows it, but not on the menu. Is there a way for me to get this to show up?
Offline
It cause issue on some displays, so ability to select it is removed.
Offline
What would be the next best option? I'm using a raspberry pie to to control the screen through the hdmi port. I can't get the display to show any of the calibration images under "projector calibration".
Offline
Why? Are you sure HDMI settings are correct?
Offline
My display settings are here: https://i.imgur.com/wOXNbnz.png
Additionally, I have added the following lines to the bottom of the Pi configuration file
hdmi_force_hotplug=1
disable_overscan=1
framebuffer_depth=24
gpu_mem=192
framebuffer_ignore_alpha=1
hdmi_cvt=1440 2560 48
hdmi_group=2
hdmi_mode=87
hdmi_pixel_freq_limit=400000000
hvs_priority=0x32ff
max_framebuffer_width=1440
max_framebuffer_height=2560
framebuffer_width=1440
framebuffer_height=2560
config_hdmi_boost=4
hdmi_timings=1440 0 70 35 45 2560 0 12 2 2 0 0 0 50 0 204000000 0
I'm not sure what else I should change to get it to display.
Any help is much appreciated.
Offline
