You are not logged in.
Pages: 1
Hi!
Build1256
When I add a new stl file in the plate, it generates an error and mixes layers from the last printing I did with the new file. I tried to print files that worked properly before but now the layers always appear interspersed with the same layers of the last printing.
The interspersed layers never changes, no matter if i change different stl files in the plate.
I would appreciate any help to this problem.
Offline
Could you share the STL file? Have you tried another STL file?
Offline
This is one of the files i want to print:
https://www.dropbox.com/s/v6hctm0rptbu4 … 2.stl?dl=0
I already tried another stl files that worked perfectly few days ago, but now all the files I add to the plate get the same problem.
It is like if for any reason some layers of the latest print got frozen, and now no matter the stl file i add always appears the same frozen layers interspersed.
Offline
Please, share the error messages and export of STL file.
Offline
Hi Shahin!
Yesterday i add the STL file to the plate and suddenly the problem was solved.
Thanks for the support!!
Offline
Pages: 1