nanoDLP

F.m

Member

Registered: 2017-12-22

Posts: 147

unknown signs before each line of Gcode in nanodlp windows

testing nanodlp windows with ramps and arduino,
at the start, there are printed unknown sings before each line of gcode that echo returns: unknown command. also when i send "G28" or other gcodes, it behaves the same. what is the problem? please look at end lines in the link below:
https://img.techpowerup.org/200726/untitled308.png

Last edited by F.m (2020-07-26 18:48:01)

Shahin

Administrator

Registered: 2016-02-17

Posts: 3,541

Re: unknown signs before each line of Gcode in nanodlp windows

Share a debug file

F.m

Member

Registered: 2017-12-22

Posts: 147

Re: unknown signs before each line of Gcode in nanodlp windows

here is the debug file:
https://drive.google.com/file/d/1HanFL_ … sp=sharing

Shahin

Administrator

Registered: 2016-02-17

Posts: 3,541

Re: unknown signs before each line of Gcode in nanodlp windows

Configuration seems correct. I guess parity and other serial related setting are not correct causing issue. There are lots of extra characters at the end of each command being send or received.