You are not logged in.
Pages: 1
Hello. Thank you for always. The output screen of the touch screen keeps flashing after this update, what should I do?
Last edited by uups (2020-03-25 22:34:44)
Offline
Could you let me know which build was correct and now which build you are using?
Offline
Could you let me know which build was correct and now which build you are using?
After updating from 2335 to 2615 it is.
However, in my expectation, after the release of Pi 4, the tibus version does not seem to work properly from the updated version.
Offline
Not sure about tibus. But internal one should work correctly.
Offline
Not sure about tibus. But internal one should work correctly.
It works normally when it is set as the default image on the nanoDLP download page.
But after this update, it will be like the video.
Something seems to have changed with this update.
Offline
I got my hand on nextion at least on the latest beta version, flickers not happening on nextion.
Offline
I got my hand on nextion at least on the latest beta version, flickers not happening on nextion.
Even in the latest beta version 2645, the touch screen is still flickering.
Offline
Not sure what causing this, could you measure how much time between two flicker?
Offline
Not sure what causing this, could you measure how much time between two flicker?
I'll take a video and measure the time.
Offline
Not sure what causing this, could you measure how much time between two flicker?
Best regards Shahin.
version 2335 2s
2692 1.5s
There seems to be a communication-related change.
I did some tests on version 2962.
1.Pi config = bluetooth stop
tibus touch = normal
Official touch = not working = flickering when printing like video
2. Pie Configure = Use Bluetooth
tibus touch = not working
Official Touch = Normal
Offline
You mean when bluetooth is enabled, the flicker goes away?
Offline
Pages: 1