nanoDLP

3dbss

Member

Registered: 2020-02-21

Posts: 2

Remote Acces Using the key

Hi, an issue occoured on last builds is that selecting a remote key, going to the dashboard and inserting that key, you can see your selected printers, until here alright.
If you connect using remote key by another lan, for example using your phone connection to forward home Lan, inserting the key and selecting your printer, you will be redirected to a private IP, the one that your printer has got in the Local area network it is located.
For example my printer is 192.168.0.5
The key could be 12345
I go to Nanodlp dashboard from the same lan of the printer and i get redirected to the printer.
Connecting in the same way from the network of my phone, than a different network, i get redirected to the same private IP that won't work because 192.168.0.5 in my phone network doesn't refer to the same as home network.
Any idea?
Thank you

Shahin

Administrator

Registered: 2016-02-17

Posts: 3,541

Re: Remote Acces Using the key

Your printer is on your home lan and right now nanodlp only accessible from lan. You can port forward if needed to access through internet.
Your phone is on different network so it could not access nanodlp.