You are not logged in.
Pages: 1
Hi everyone. I just buy a cheap DLP printer (STEK X Cube 8.9) from China.
It has only USB A port to stick USB thrumb drive in to print.
Is there any way to control it by Nanodlp?
Spec.
Model : Stek3dp X-cube 8.9 plus
Technique: LCD Shadow Masking
Type of Guide : T-type screw & Double wire gauge(The most stable Z axis)
Print volume : 192*120*250mm
XY axis Resolution : 75um
Layer thickness : 25-100um
Z axis Resolution : 1.25um
Imaging screen : 8.9 inch LCD screen 2560*1600 531ppi
Display screen : 3.5 inch color touch screen
Body : Aluminum alloy
Z-axis drive : 8729 motor drive(64 subdivision)
Motor : 42 shaft motor(T pole)
Connect : USB
Light source:UV LED 80w(405NM) powerful new light source
Exposure time:10-20s
Slice software : Chitu
Input voltage : AC220 (110-240 50/60HZ)
Output voltage : DC 24V (Built in power)
Power : 100w
Weight : 16kg
Offline
Hi I dont think it is possible . Much like many DLP printers ( Ellegoo, Photon etc ) they use their own proprietary software & touch screen.
Offline
As I know stek3dp already using NanoDLP. Please, confirm it with the manufacturer.
Offline
Thanks for your reply.
Could I change the motherboard that supports NanoDLP? What should be aware of? Are there any recommendations?
As I know stek3dp already using NanoDLP. Please, confirm it with the manufacturer.
NanoDLP is only available in the 5.5-inch version. Mine is an 8.9-inch version.
Offline
Nothing prevents you change the motherboard but will require some electronic knowledge.
Offline
Pages: 1