Regenerate Question

4lathe · 2019-10-30 21:56:39

If you add a .zip file to Plates, then hit Regenerate, what is nanodlp supposed to do?
Thx

bigfilsing · 2019-10-30 23:01:09

Just my 2 cents . The only time ive used regenerate is if ive changed the resin type/profile of a model in NanoDLP

4lathe · 2019-10-30 23:30:05

Thats what I thought, but When I hit it after loading a .zip it just sits there saying this is not sliced. No error no nothing.

bigfilsing · 2019-10-31 01:15:47

ok but when you've loaded a zip ( plate) you specify the resin yes . Try changing to a different resin profile then hit regenerate. Note: I'm working from memory as I'm not near my printer at the moment to test.

Shahin · 2019-10-31 04:58:15

Usually it should not display regenerate for such plates.

4lathe · 2019-10-31 07:06:03

This is 2418 running on a mac. It definitely does display and allow you to select Regenerate.

ElDavo · 2019-11-02 15:00:27

Just to add in, I upgraded to 2418 today and if I hit "regenerate" on any existing plate it just sits there saying "plate has not yet been sliced". If I click away to another page, resin profiles for instance, then come back to the plates page the model appears to have been sliced and is ready to print. Looks like a general problem with displaying the state of slicing.

Cheers
Dave

Shahin · 2019-11-02 18:44:28

Could not reproduce it. Maybe it is cached resource issue. Try refresh page using ctrl+shift+f5.

ElDavo · 2019-11-06 11:53:01

Doing a refresh as suggested cured the problem for me.

Cheers
Dave

Shahin wrote:

Could not reproduce it. Maybe it is cached resource issue. Try refresh page using ctrl+shift+f5.

4lathe · 2019-11-09 00:03:05

Got back to my printer. These 3 .stl’s were all sliced on the printer and I printed one of them. They all have valid previews so they are all sliced but even after page refresh they still show as not sliced. This is 2418.

4lathe · 2019-11-09 00:05:15

Also After upgrading to full nanodlp on my phrizen xl, should I Expand File System in the Tools Section?

macdarren · 2019-11-09 05:54:39

I expanded mine, but I also previously cloned my flash card on to a 32GB card before updating nanodlp...I expect the factory card has a filesystem that matches the card,,probably it won't hurt to do it. If you ssh into the pi you can tell if the filesystem matches the card.

4lathe · 2019-11-09 16:02:24

Thx macdarren. Do you know what they use as a password for the pi?

4lathe · 2019-11-10 17:15:05

@macdarren I haven't been able to figure out the pwd for the shuffle xl raspberry pi instance. Someone had PhrozenNO1 but that doesn't work. Do you recall it?

macdarren · 2019-11-11 15:10:33

I never figured it out either..but ther is a way to reset it...I don't recall the exact steps but there are instructions online... probably google 'resetting root password for raspberry pi 'or something similar. I think you do have to remove card and have another pi to use...at least I think I did it that way.

4lathe · 2019-11-12 02:17:50

Got it from another on facebook. For anyone interested. - ph2008

nanoDLP

#1 2019-10-30 21:56:39

Regenerate Question

#2 2019-10-30 23:01:09

Re: Regenerate Question

#3 2019-10-30 23:30:05

Re: Regenerate Question

#4 2019-10-31 01:15:47

Re: Regenerate Question

#5 2019-10-31 04:58:15

Re: Regenerate Question

#6 2019-10-31 07:06:03

Re: Regenerate Question

#7 2019-11-02 15:00:27

Re: Regenerate Question

#8 2019-11-02 18:44:28

Re: Regenerate Question

#9 2019-11-06 11:53:01

Re: Regenerate Question

#10 2019-11-09 00:03:05

Re: Regenerate Question

#11 2019-11-09 00:05:15

Re: Regenerate Question

#12 2019-11-09 05:54:39

Re: Regenerate Question

#13 2019-11-09 16:02:24

Re: Regenerate Question

#14 2019-11-10 17:15:05

Re: Regenerate Question

#15 2019-11-11 15:10:33

Re: Regenerate Question

#16 2019-11-12 02:17:50

Re: Regenerate Question

Board footer