You are not logged in.
Pages: 1
Latest Beta update causes my printer to fail to activate the UV lamp.
(using LCD / RAMPS style printer)
I pulled the printer apart looking for a problem...found nothing.
Tried multiple times with v2376 and nothing, even calibration fails to activate UV.
I reverted to latest release version light started working again.
Updated again to latest beta, UV fails.
went back to release and UV works....
So stuck at release version 2335 for now.
......
Anyone else had this problem?
I can't imagine how this could break...almost like nano is not sending the shutter open command...but how that would get broken is a mystery
of if it gets tweaked in some setting how it would get fixed when I downgrade back to the release version seems odd.
When I get a chance I will update again and get a log dump and see if I can find the problem...
Last edited by macdarren (2019-10-16 22:24:40)
Offline
touching this topic to see if it gets a response...dev 'team' must be on break, they are usually so fast I have gotten spoiled.
Offline
Where do you trigger shutter on/off? Is it working from projector calibration page?
Offline
no it doesn't work from the calibration page....
Not sure what you mean 'where do you trigger the shutter'
If you mean Type is TRUE/FALSE - Physical 11, BCM 17 to switch the SSR, 500/2500ms pulse open/close and signal length of 1000ms which seems odd now.
(I didn't check if that changed after the update but it clearly changed back to something that works after the downgrade)
I have no shutter open or close Gcode.
Offline
Try the latest beta.
Offline
sadly latest beta still has no light and worse seems to get stuck on first layer.
Offline
logs send via email
Offline
Please, try again.
Offline
Updated to Beta ver: 2397
Print platform moves both up and down (no longer stuck on first later)
Sadly there is also NO UV triggered... I can see the open/close shutters in the log but no light activation.
nanoDLP no longer crashes I can stop and start the print as expected.
so better, but still not useable ...
I saved a Debug file but must revert to the release again to use printer.
I can test further in about 8 hours.... If needed we can go live tomorrow for more rapid testing.
Thanks
oh and I checked; the shutter information is not changing when I move to the beta....
Last edited by macdarren (2019-10-18 15:56:41)
Offline
Darren whats your rpi version?
Offline
hmmmm....not sure anymore. I want to say 3b+. I got it just over a year ago so I think it was the last physical model
before the 4....software might be a bit older...
Is there and easy way to tell without digging it out of the box... via command line?
I'll google that....
pi@raspberrypi:~ $ cat /proc/device-tree/model
Raspberry Pi 3 Model B Rev 1.2
pi@raspberrypi:~ $
Not sure if this is helpful.....
pi@raspberrypi:~ $ cat /etc/debian_version
8.0
pi@raspberrypi:~ $ cat /etc/os-release
PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
NAME="Raspbian GNU/Linux"
VERSION_ID="8"
VERSION="8 (jessie)"
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"
pi@raspberrypi:~ $ uname -a
Linux raspberrypi 4.9.35-v7+ #1014 SMP Fri Jun 30 14:47:43 BST 2017 armv7l GNU/Linux
pi@raspberrypi:~ $ cat /proc/cpuinfo
processor : 0
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 1
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 2
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 3
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
Hardware : BCM2835
Revision : a32082
Serial : 0000000020cee886
pi@raspberrypi:~ $
Last edited by macdarren (2019-10-18 20:37:55)
Offline
Thanks, could you try latest beta once more. Unfortunately I do not have hardware around to make sure it resolved locally.
Offline
beta 2399 seems to have fixed the Shutter/LED
I will print something, however, the lcd calibration now activates the LEDs so I expect a regular print will as well.
I guess there is something about my still using Jessie?
Offline
No, recent patch to fix compatibility issue with rpi4 broke gpio module. I guess we are safe until rpi5
Offline
Pages: 1