You are not logged in.

#1 2019-05-05 12:58:41

somik
Member
Registered: 2018-02-07
Posts: 65

LCD, LED, CASE heat control

I added 3 temperature sensors to the ramps board: LED temperature, LCD temperature, temperature inside the case.
The temperature values are passed in the form of the string “temp C: 40.0 40.1 57.6”
In Application Log, this line is displayed like this:
UNKNOWN 2019-05-05 12: 52: 32.020718 {"Layer": "0", "module": "Terminal", "level": "Notice", "msg": "Received Data From Controller: temp C: 40.1 - 59.3↵ "}

Is it possible to add 3 graphs to the main NanoDLP screen with the measured temperature?
How to transfer parameters from Ramps so that they are displayed in Log not as Unknown?

Offline

#2 2019-05-05 19:30:22

Yianni-VJ
Member
Registered: 2016-05-24
Posts: 94

Re: LCD, LED, CASE heat control

Please add that Shahin, It will be extremely useful !

Offline

#3 2019-05-07 05:16:38

Shahin
Administrator
Registered: 2016-02-17
Posts: 3,429

Re: LCD, LED, CASE heat control

We will need to rewrite whole RAMPS module. Will add it to backlog.

Offline

#4 2020-12-09 08:04:10

Shahin
Administrator
Registered: 2016-02-17
Posts: 3,429

Re: LCD, LED, CASE heat control

Hi sensor reading added for directly connected sensors.
Also we have new analytics dashboard to show read sensor. Please, share sample sensor reading output from Marlin and GRBL if you can so we will add it to nanodlp.

Offline

Board footer

Powered by FluxBB