nanoDLP

jb

Member

Registered: 2017-05-22

Posts: 4

Missing layer - NanoDLP Slicer

Hi everybody,

After my update on my last version of the NanoDLP Slicer, I got now some missing layer randomly...
I never change my machine setting or resin profile for 2 years and STL files stay the same.

Here some example :

Does anyone have the same problem? An idea of a solution?

Thanks all for your help & reply!

Jean-Baptiste

Shahin

Administrator

Registered: 2016-02-17

Posts: 3,541

Re: Missing layer - NanoDLP Slicer

Please, share the STL file. It the most probably faulty triangle which affect slicer in special conditions. You can checkout the issue using netfab.

elshad66

Member

Registered: 2017-03-31

Posts: 118

Re: Missing layer - NanoDLP Slicer

Hello Shahin
I had cases when  (1956 build)
I put one element and copied to nanodlp  pressing C
creating multiple pieces(chains)
and came out the same problem as described above
item has been checked through  magics 20
then I just changed the position of the elements and everything was fine

but I had another problem
after upgrading to 1919, pi does not load the first time
the projector shows a red yellow green square
you need to restart 3-4 times, sometimes it does not help
sd card extract and insert helps sometimes
each time differently
DC  is stable, not lower than 5.1-5.2 volts

Last edited by elshad66 (2018-11-13 12:25:10)

jb

Member

Registered: 2017-05-22

Posts: 4

Re: Missing layer - NanoDLP Slicer

Thanks for your rapid answer @Shanin.

I just send you an MP with a link of one STL. It's always repaired with netfabb...

Thanks again for your help!

uups

Member

Registered: 2018-01-08

Posts: 33

Re: Missing layer - NanoDLP Slicer

Please, share the STL file. It the most probably faulty triangle which affect slicer in special conditions. You can checkout the issue using netfab.

Hi. Shanin. Thank you for always.
I had a similar problem. So I would like to suggest one thing. Like creation workshop
Can I give options to slicers?
compound path

Shahin

Administrator

Registered: 2016-02-17

Posts: 3,541

Re: Missing layer - NanoDLP Slicer

I do not know which option you are talking about.