You are not logged in.

#1 2018-10-23 18:06:32

regman72
Member
Registered: 2018-10-23
Posts: 5

XY Resolution

Hello,
If I use XY resolution of 219 micron and y resolution of 208 micron, then only the 219 micron will be taken.
Also listed in the Plates menu is the same. X: 219 Y: 219 although Y must be 208.

How can I correct this

Thank you

Offline

#2 2018-10-27 05:50:35

Shahin
Administrator
Registered: 2016-02-17
Posts: 2,760

Re: XY Resolution

Make sure you have not override it on another section. Resolution settings on nanodlp got too complicated somehow it should simplified.

Offline

#3 2018-10-27 07:36:55

regman72
Member
Registered: 2018-10-23
Posts: 5

Re: XY Resolution

Hi Shahin,
The parameters for X/Y have been set only in Setup. For the resin settings, the values are 0.
I don't see any other setting options to change this.
If you change hdmi_cvt y from 600 pixels to 575 in config. txt, you can adjust the ratio.

But that's not a nice solution.

Offline

#4 2018-11-04 01:56:18

Shahin
Administrator
Registered: 2016-02-17
Posts: 2,760

Re: XY Resolution

I have update nanodlp to simplify resolution procedure, please try and let me know if it still not clear.

Offline

#5 2018-11-04 18:47:45

regman72
Member
Registered: 2018-10-23
Posts: 5

Re: XY Resolution

Thanks, it works just fine

Offline

#6 2019-02-05 03:08:34

Acticle
Member
From: Burkina Faso
Registered: 2019-01-10
Posts: 1

Re: XY Resolution

your resolution is too small. I got the same screen resolution and theres no way to play the game in windowed mode with those resolutions.

Offline

Board footer

Powered by FluxBB