You are not logged in.
Pages: 1
hey there
so suddenly my printer started to fail after 100+ layers into the print process
im using a muve3d setup(changed a lil bit their firmware a while back)
what happen is:
im sending a print
at the first couple of hundres layers all goes well
but the suddenly the printer is getting into a loop of the peeling procedure without projecting pictures
but the layers numbers do increased after every peeling cycle
its like it totally ignores the [[WaitForDoneMessage]]
the result is a big fail
G1 X{[[LayerThickness]]*90} Y{[[LayerThickness]]*10} F15
[[WaitForDoneMessage]]
G1 X{[[LayerThickness]]*10} Y{[[LayerThickness]]*90} F15
[[WaitForDoneMessage]]
G1 X1 Y1 F15
[[WaitForDoneMessage]]
G1 X-1 Y-1 F15
[[WaitForDoneMessage]]
G1 X{[[LayerThickness]]*(-99)} Y{[[LayerThickness]]*(-99)} F15
[[WaitForDoneMessage]]
at first all work fine and after random number of layers, the mess is starting to happen
tried to post links for downloading profiles but im not allowed...
Offline
Which version you are using?
Offline
hey shahin
I have upgraded to build 1833
the problem stopped for a few days
but now its back
really strange
when the printing process goes from burn in layers to normal layers
suddenly the [[WaitForDoneMessage]] stops from making the machine to stop and she is working continuously without stopping in the curing process
Offline
Please, share a debug file.
Offline
Pages: 1