nanoDLP

kenlyl

Member

Registered: 2018-04-27

Posts: 3

Hexagonal infill with support

I added support with another software (ChiTu & meshmixer)
Then I slice the  STL with hexagonal infill enabled in the nanodlp.
The result is the support disappeared or very thin as in the photo.

Shahin

Administrator

Registered: 2016-02-17

Posts: 3,541

Re: Hexagonal infill with support

Looks like there are issues on support structure. Please, share STL file if you can.

kenlyl

Member

Registered: 2018-04-27

Posts: 3

Re: Hexagonal infill with support

The following is the STL export from nanodlp

https://

drive.google.com/file/d/1MzhGYf2-lYWk5dnWl1kYOsqhetDPGu2O/view?usp=sharing

Shahin

Administrator

Registered: 2016-02-17

Posts: 3,541

Re: Hexagonal infill with support

I could not reproduce the issue on the latest build, looks like you are using older version of nanodlp.

kenlyl

Member

Registered: 2018-04-27

Posts: 3

Re: Hexagonal infill with support

I use win 10 build 1830 nanodlp
and I import the setting from my 3D printer to the win10 nanodlp.

I still see the holes in the support structure.

here is the setting files.

https://

drive.google.com/file/d/1xO5PBXP9b-qCiJFYiGvYeODxqkqpqa3b/view?usp=sharing

https://

drive.google.com/file/d/1zfwBf4VSlSQ2tF5m8MvxjsXRYJi-WI-U/view?usp=sharing

Shahin

Administrator

Registered: 2016-02-17

Posts: 3,541

Re: Hexagonal infill with support

Nothing to do with setting, older slicers had bug which has been fixed on recent version. I could not produce the issue on the latest builds.