nanoDLP

nnnn2013

Member

Registered: 2017-11-21

Posts: 13

RAMP shutter problem solved

I am doing DLP printer with RAMPS, Raspberry pi3, nanodlp.

I loaded "Marlin-mUVe1DLP-Running-master" configuration to Arduino Mega 2560.

Connected lamp to D9 on RAMPS, but when i send command M106 it didnt work.

Then i found out that in pins.h, row 475 is " #define FAN_PIN            4 "

I changed 4 to 9, and it worked. (#define FAN_PIN            9)

Hope, this helps someone else too

AntunesS

Member

Registered: 2017-09-19

Posts: 10

Re: RAMP shutter problem solved

Thank you nnnn2013!

JakeTse

Member

Registered: 2018-04-23

Posts: 3

Re: RAMP shutter problem solved

Thanks for the info!!