Plates disappear after upload

grizfyrfyter · 2018-03-31 02:01:43

I just replaced the screen on my printer after 6 months and fired nanodlp up again.

I upgraded to the latest version and have had trouble uploading plates since then. The file will upload fine but won't start slicing. If I do anything else in the software, the plate disappears when I come back to that page.

Build 1821

Shahin · 2018-03-31 05:07:57

Have you tried different files?

grizfyrfyter · 2018-03-31 05:12:12

I have tried 3 small files, all with the same result.

I formatted and reinstalled nanodlp and still have the same result

Shahin · 2018-03-31 05:30:16

Please, share a debug file before uploading and one after uploading a new plate.

grizfyrfyter · 2018-03-31 22:50:21

before
nanodlp.debug.-1291582830.zip

i get the following message in the log.
slicing locally is unsuccessful. runtime error: makeslice: len out of range

plate hasnt disappeared yet but wont process.

Shahin · 2018-04-01 02:57:04

Could you share the STL file?

grizfyrfyter · 2018-04-01 03:02:47

https://www.thingiverse.com/thing:1219068

Shahin · 2018-04-01 15:33:50

They get processed correctly, also I could not find their trace on debug file.

grizfyrfyter · 2018-04-02 14:42:42

I am having the same problem with the Make Rook model and everything else i try. First tiem this morning, the plate was deleted. second try and it said the plate was corrupted.

Im going to try a different RPi i have laying around but until i can get this fixed, my printer is useless.

here is the most recent debug file.
nanodlp.debug.328806540.zip

thanks for all your help, i really appreciate it.

grizfyrfyter · 2018-04-04 21:23:49

installed build 1437 again and started there. it gets about halfway through slicing a file then nanodlp crashed and it starts over again then crashes over and over again.

put the sd card into another RPi 3 and its exactly the same.

Last edited by grizfyrfyter (2018-04-04 21:24:25)

grizfyrfyter · 2018-04-09 05:41:51

bought a brand new sd card. brand new RPi 3. Fresh download of the nanodlp image of build 1437. fresh download of the sal test cube stl from thingiverse. once i pull up nanodlp.local (without changing any settings) and try to recreate the pre loaded Make Rook file with the pre loaded resin profile, it crashes 1/3 of the way through slicing. try the sla test cube and it crashes around 1/5 of the way through slicing.

i am completely lost at this point. i really dont see what i can be doing wrong. everything worked fine before my LCD broke 6 months ago.

Shahin · 2018-04-09 13:25:50

Very strange as you are only one having this issue. Have you tried changing your power supply?

grizfyrfyter · 2018-04-09 14:34:55

i will try a new power supply today. thank you for the suggestion.

grizfyrfyter · 2018-04-11 18:00:33

Holy. Crap.

I feel like a moron. New power supply fixed it.

elshad66 · 2018-04-11 21:28:05

to take
https://www.ebay.com/itm/5A-LED-Digital … SwtsVZjnMk
adjust output 5.2v
and everything will be fine

nanoDLP

#1 2018-03-31 02:01:43

Plates disappear after upload

#2 2018-03-31 05:07:57

Re: Plates disappear after upload

#3 2018-03-31 05:12:12

Re: Plates disappear after upload

#4 2018-03-31 05:30:16

Re: Plates disappear after upload

#5 2018-03-31 22:50:21

Re: Plates disappear after upload

#6 2018-04-01 02:57:04

Re: Plates disappear after upload

#7 2018-04-01 03:02:47

Re: Plates disappear after upload

#8 2018-04-01 15:33:50

Re: Plates disappear after upload

#9 2018-04-02 14:42:42

Re: Plates disappear after upload

#10 2018-04-04 21:23:49

Re: Plates disappear after upload

#11 2018-04-09 05:41:51

Re: Plates disappear after upload

#12 2018-04-09 13:25:50

Re: Plates disappear after upload

#13 2018-04-09 14:34:55

Re: Plates disappear after upload

#14 2018-04-11 18:00:33

Re: Plates disappear after upload

#15 2018-04-11 21:28:05

Re: Plates disappear after upload

Board footer