You are not logged in.

#1 2018-03-29 15:06:20

tsharris
Member
Registered: 2018-03-10
Posts: 23

How to rotate model in nanodlps support generation feature

Can some one tell me how to rotate the model in relation to the build plate? I want to use the nanodlps plating and support creation feature but I can't seem to rotate the model in all 3 axis,... only one axis. What am I missing?

Todd

Offline

#2 2018-08-09 13:43:57

JMG138
Member
Registered: 2017-06-06
Posts: 14

Re: How to rotate model in nanodlps support generation feature

Same question here...

Shanin: do you plan to add some "advanced" placement/orientation feature in the buidplate interface?

Offline

#3 2018-08-19 03:50:47

Shahin
Administrator
Registered: 2016-02-17
Posts: 3,536

Re: How to rotate model in nanodlps support generation feature

You can rotate models as soon as loading into editor by left click on an object, hold click and drag mouse.

Offline

#4 2018-11-03 09:03:10

JMG138
Member
Registered: 2017-06-06
Posts: 14

Re: How to rotate model in nanodlps support generation feature

Ok, but I was more expecting something like the Ultimaker Cura software system (incremental positioning with snaping position, available for the 3 axis). It is very difficult to position accuratly the models on the plate with Nanodlp. I have to edit my model in Cura, save it as stl and reopen it with nanodlp.

Offline

#5 2019-04-03 12:25:44

jannoke
Member
Registered: 2018-03-26
Posts: 7

Re: How to rotate model in nanodlps support generation feature

Surely this is joke? Freehanding a cad file now? Nobody freehand draws 3d object when accuracy is involved. Funny thing is that there is a rotate feature in plate view , but only on one axis (and useless one for that case).

Offline

#6 2019-10-21 07:35:42

Redsalamander
Member
Registered: 2017-09-25
Posts: 6

Re: How to rotate model in nanodlps support generation feature

Agreed it is unusable.

Have to orientate the model in meshmixer or even cura and then export again. ??????

Even just a rough turn and layflat option would be good.

Offline

Board footer

Powered by FluxBB