You are not logged in.

#1 2018-01-06 15:36:49

MonkeyTurnip
Member
Registered: 2018-01-06
Posts: 1

Latest Build as an image file

Hi is there a newer version of the image file that 1380?

on this https://www.nanodlp.com/download/ the image file is 1380. i see in the build log thread it goes upto 1700, i would just like to use the latest version, but i seem to not be able to find a .img.

using a Wanhao D7 if that makes a difference.

TIA

MonkeyTurnip

Offline

#2 2018-02-21 14:37:13

miserovitch
Member
Registered: 2018-02-21
Posts: 15

Re: Latest Build as an image file

Hi,

Same question for the same machine.
Hope we'll have some answer.

BR

Offline

#3 2018-02-22 01:47:53

elshad66
Member
Registered: 2017-03-31
Posts: 118

Re: Latest Build as an image file

setup>> tools>>upgrade  nanodlp   --choose   beta   or   stabile version
wait 2-3 minutes PI update  and automatically reboot

latest   beta 1787

Last edited by elshad66 (2018-02-22 01:56:37)

Offline

#4 2018-02-23 08:05:28

miserovitch
Member
Registered: 2018-02-21
Posts: 15

Re: Latest Build as an image file

Hi,

Thanks for the help.
I had issue with update. I solved it by accessing RPI through SSH and updating the hour (auto time adjust is not working...).

So now I have the last build...and another problem :-)
I will look in the forum, if I don't find I'l open a new topic.

LC

Offline

#5 2018-02-23 16:32:26

elshad66
Member
Registered: 2017-03-31
Posts: 118

Re: Latest Build as an image file

1.   enter the router or modem and make the address pi static
2.   make the address PC  static
3.  Set your settings and options in the pi
4 .Download Windows 32bit version or Windows 64bit version. and run  only nanodlp.exe  (not necessary  settings and options)
5.  in  PI  --  setup  >>Remote Slicer  write IP  static  address PC   192.168.xxx.xxx:8080
6. Load STL model in PI
7 .if you want to update, do as you wrote above

Last edited by elshad66 (2018-02-23 17:29:58)

Offline

Board footer

Powered by FluxBB