nanoDLP

Darren

Member

Registered: 2017-12-08

Posts: 2

步进电机不工作/Step motor does not work

大家好，我在制作一台3D打印机，使用LCD液晶屏的方式，没有使用投影仪，目前我制作了nanodlp直接控制的PCB板，但是测试时候步进电机没有工作，能否告诉我这nanodlp直接控制的PCB板该如何接线，以便验证我接线是否正确，我想要上传图片，但是在论坛没找到可以上传图片的方法。

Hello, I'm making a 3D printer, LCD LCD screen, without the use of projector, PCB plate at present I made nanodlp direct control, but the test when the stepper motor does not work, can you tell me the nanodlp PCB board directly control how to verify my wiring, the wiring is correct, I you want to upload pictures, but not found in the forum can upload pictures.
              -------Translation comes from Baidu

Darren

Member

Registered: 2017-12-08

Posts: 2

Re: 步进电机不工作/Step motor does not work

我不能使用控制按钮或终端来移动Z轴。
I can't use the control button or terminal to move the Z axis.

BD7KLE

Member

Registered: 2018-01-22

Posts: 2

Re: 步进电机不工作/Step motor does not work

居然看到中文..亲切阿
I can see Chinese.. amiable.

JohnnyPlayer

Member

Registered: 2018-04-04

Posts: 6

Re: 步进电机不工作/Step motor does not work

连上nanodlp后在界面上check下直连的GPIO是否开启，开启的话至少Z轴是可以控制的