nanoDLP

macdarren

Member

Registered: 2017-03-20

Posts: 411

Re: Horizontal Size Compensation in the resin profiles...

An I correct that this feature (burnin-erode) is supported in the Rpi version but if using a remote slicer it will be ignored?
Could not get it to work at first, but then suddenly it started I then realized my remote slicer went offline....(remote is linux ver 2177)

Shahin

Administrator

Registered: 2016-02-17

Posts: 3,541

Re: Horizontal Size Compensation in the resin profiles...

Make sure both versions are same.

macdarren

Member

Registered: 2017-03-20

Posts: 411

Re: Horizontal Size Compensation in the resin profiles...

I can't seem to get a newer Linux system (desktop remote slicer) than 2177 using:  wget  -P ~/Desktop/ "https://www.nanodlp.com/download/nanodlp.linux64.zip"

Is there a different way to get the Beta?

It does show in blue on the dashboard that there is a newer version available but since there is no internal updater
in linux using wget is all I know how to do.

Last edited by macdarren (2019-05-02 14:31:24)

DrNK

Member

Registered: 2016-11-19

Posts: 94

Re: Horizontal Size Compensation in the resin profiles...

Positive value makes object smaller and negative - bigger?

macdarren

Member

Registered: 2017-03-20

Posts: 411

Re: Horizontal Size Compensation in the resin profiles...

correct...I use -0.3 to reduce elephant foot issue on burn in layers of models printed directly on the platform

DrNK

Member

Registered: 2016-11-19

Posts: 94

Re: Horizontal Size Compensation in the resin profiles...

correct...I use -0.3 to reduce elephant foot issue on burn in layers of models printed directly on the platform

If you use -0.3 (negative) for reducing - I`m wrong

Positive value makes object smaller and negative - bigger?