You are not logged in.
If you have the first layer completely white you can achieve it.
Lets say layer 1 is completely white.
You just want to display whole layer for 0.1s. Inside after layer print gcode box put following
[[DisplayLayer 1]]
[[Delay 0.1]]
[[Blank]]
Offline
WIll try this thanks!
Offline
Hello!
Also couldn`t enter to windows 64 bit ver.
2019/11/13 22:25:40.256993 {"Layer":"0","module":"Config","level":"Error","msg":"File db/machine.json issue. CreateFile db/machine.json: The system cannot find the file specified."}
2019/11/13 22:25:40.330970 {"Layer":"0","module":"Config","level":"Error","msg":"File db/profiles.json issue. CreateFile db/profiles.json: The system cannot find the file specified."}
2019/11/13 22:25:40.334971 {"Layer":"0","module":"Hardware","level":"Notice","msg":"Initializing build # 2418 -"}
2019/11/13 22:25:40.335969 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Terminal Reader Activated"}
⇨ http server started on [::]:8080
Offline
Looks like static resources missing. You are trying 127.0.0.1:8080 on your browser right?
Offline
Yes, 127.0.0.1:8080.
Our router has 192.168.230.x
Offline
What it displays on the browser?
Offline
It's on post #28
Offline
What being displayed after entering nanodlp IP:PORT on your browser not terminal.
Offline
@DrNK: What I did to solve that was to disable other apps thats using port 8080.
@Shahin: I notice very small lag/delay for every layer. When I try to sync nanoDLP with other components (z actuator) there is a very small time difference but it adds up over many layers and become significantly noticable. Any idea how to fix this? I control the other actuator with LabView.
Thanks!
Offline
Do you know exactly where delay comes into effect?
There is artifical 50ms delay for GPU (20FPS) to make sure correct cure time for layers.
Offline
I tried to figure it out but couldnt tell since the delay is very small and I could only tell after about 20 layers or so. Is there anyway I can remove the 50 ms delay and see if it makes a difference?
Offline
Send me details through an email.
Offline