You are not logged in.

#1 2016-02-18 16:30:20

mUVe3D
Member
Registered: 2016-02-17
Posts: 2

mUVe 3D nanoDLP Instructions

Setup and Usage Instructions

https://drive.google.com/file/d/0B8xCOd … sp=sharing

*Updated* - Fixed Link

mUVe 3D Support

Last edited by mUVe3D (2016-02-20 20:07:12)

Offline

#2 2016-02-18 21:35:28

adam
Member
Registered: 2016-02-18
Posts: 100

Re: mUVe 3D nanoDLP Instructions

Access for link is restricted, is it public?

Offline

#3 2016-02-19 08:56:54

joaoreina
Member
From: Paris, France
Registered: 2016-02-19
Posts: 20

Re: mUVe 3D nanoDLP Instructions

Hi there,

- Does a new release of nanoDLP also means the muve3D version was updated? I currently have the 988 build installed
- When updating the version, what happens to the printer profiles and uploaded plates? are they overwritten or kept in the new version?

thanks

Offline

#4 2016-02-19 09:31:12

Shahin
Administrator
Registered: 2016-02-17
Posts: 2,541

Re: mUVe 3D nanoDLP Instructions

Adam,

It is public, I can access it on my private window too.

Joaoreina,

- Not exactly, muve3d version gets updated after Dean confirmation. Currently generic version is a little bit newer. (probably have one or two small bugs more than muve3d version) Still both versions are compatible with each other.
- Upgrades does not touch your config files or plates, but sometimes Dean tweak the settings if you want to access those new settings you need to press "restore default" button on setup/tools page. Which will erase both your settings and plate data.

You can always take backup by coping /home/pi/printer/db/ contents.

Offline

#5 2016-02-19 16:15:34

joaoreina
Member
From: Paris, France
Registered: 2016-02-19
Posts: 20

Re: mUVe 3D nanoDLP Instructions

Thanks Shahin,

then, @muve3d, could you have this information available? I mean, each time a new version for the muve is out, could you acknowledge it somewhere, like on the Instructions document
thanks

Offline

#6 2016-02-19 17:33:21

mattcaron
Member
From: Galway, NY, USA
Registered: 2016-02-19
Posts: 15
Website

Re: mUVe 3D nanoDLP Instructions

I'd think the mUVe3D forums would make the most sense for announcing new versions. :-)

Offline

#7 2016-02-20 20:11:23

mUVe3D
Member
Registered: 2016-02-17
Posts: 2

Re: mUVe 3D nanoDLP Instructions

Yes, we usually post new things like this to our forums! We work on the new developments and releases before sending them out to the wild. So while the mUVe 3D releases might be slightly behind the mainstream release, it's just a delay so that we can ensure our customers get software that has been tested with our printer, and is customized to our user experience. I.e. specific buttons, etc.

Updates to the instructions will be posted back into the original instructions, so you can save the link above and call it again in the future if we make changes.

Currently we're working on posting about the latest release, remote printer monitoring, intelligent dimming for print quality improvements, etc.

mUVe 3D Support

Offline

Board footer

Powered by FluxBB