You are not logged in.

#1 2019-05-10 16:01:46

DrNK
Member
Registered: 2016-11-19
Posts: 94

Continuous printing mode on D7 with NanoDLP

I`d like to setup this mode with pauses that let lcd to cool:
1. Normal printing mode for first 30 layers 0.04;
2. Continues printing of 10 layers
3. Pause 20 sec
Repeat step #2 &3 till the end

Offline

#2 2019-05-10 18:52:32

Shahin
Administrator
Registered: 2016-02-17
Posts: 3,536

Re: Continuous printing mode on D7 with NanoDLP

[[Delay {([[LayerNumber]]%10)*20}]]

Offline

#3 2019-05-14 17:14:35

DrNK
Member
Registered: 2016-11-19
Posts: 94

Offline

#4 2019-05-14 17:17:59

DrNK
Member
Registered: 2016-11-19
Posts: 94

Re: Continuous printing mode on D7 with NanoDLP

Offline

#5 2019-05-17 11:06:51

DrNK
Member
Registered: 2016-11-19
Posts: 94

Re: Continuous printing mode on D7 with NanoDLP

Help !!!

Offline

#6 2019-05-17 16:15:30

Shahin
Administrator
Registered: 2016-02-17
Posts: 3,536

Re: Continuous printing mode on D7 with NanoDLP

[[Delay {([[LayerNumber]]%10==0)*20}]]

Offline

#7 2019-05-17 16:28:07

DrNK
Member
Registered: 2016-11-19
Posts: 94

Re: Continuous printing mode on D7 with NanoDLP

[[Delay {([[LayerNumber]]%10==0)*20}]]
1. In which field should I put this?
2. Should I change anything in Machine settings for this mode and restore before switching to normal peel mode?
3. What settings should I also change in resin profile settings along with setting 0 sec in wait before and after lift, 0 mm lift after print ?

Many thanks for your help!

Offline

#8 2019-05-17 16:57:42

Shahin
Administrator
Registered: 2016-02-17
Posts: 3,536

Re: Continuous printing mode on D7 with NanoDLP

1. after layer code box
2. no
3. nothing to best of my knowledge

Offline

#9 2019-06-03 18:48:50

DrNK
Member
Registered: 2016-11-19
Posts: 94

Re: Continuous printing mode on D7 with NanoDLP

https://photos.google.com/photo/AF1QipP … RafL7WEkqS

Close to video end there rapid LED relay on/off cycles. Could we avoid it?

Offline

#10 2019-08-17 14:40:04

DrNK
Member
Registered: 2016-11-19
Posts: 94

Re: Continuous printing mode on D7 with NanoDLP

Up

Offline

#11 2019-08-19 09:49:54

Shahin
Administrator
Registered: 2016-02-17
Posts: 3,536

Re: Continuous printing mode on D7 with NanoDLP

The shared image is not exist

Offline

#12 2019-08-19 10:12:09

DrNK
Member
Registered: 2016-11-19
Posts: 94

Re: Continuous printing mode on D7 with NanoDLP

Offline

#13 2019-08-20 06:09:29

Shahin
Administrator
Registered: 2016-02-17
Posts: 3,536

Re: Continuous printing mode on D7 with NanoDLP

Share a debug file also how do you expect it to work so I could verify your settings.

Offline

Board footer

Powered by FluxBB