nanoDLP

Abaddon

Member

Registered: 2019-04-01

Posts: 7

Some quality problem

Hi guys i have one problem with quality of object i print. They looks like some saw tooths and it is very regular effect, always the same numbers of "tooths" and the same place in every object i print. Changing curing time, microstepping, layer thickness, speed did not help and im out of ideas so i hope someone of you have any

https://drive.google.com/open?id=1KZcCm … VkhD824qnc

Shahin

Administrator

Registered: 2016-02-17

Posts: 3,541

Re: Some quality problem

Is it effects all side of your print?
How many mm into print it happens?

Also try increase wait time.

Abaddon

Member

Registered: 2019-04-01

Posts: 7

Re: Some quality problem

Yest, it is on every side of my print.
What do you mean? Height and width of tooth?
I will try with increased time, thanks.

Shahin

Administrator

Registered: 2016-02-17

Posts: 3,541

Re: Some quality problem

Also check your resin details maybe your are using that with less height than its optimized for.

Abaddon

Member

Registered: 2019-04-01

Posts: 7

Re: Some quality problem

Hi, it's me again. I did some tests, resin looks fine and bigger wait times did not help. Any other ideas ?